Embedded Wireless Charger Built-in Desk Phone Charger

Built-In Wireless and USB Charging for Desks and Tables

Create a convenient charging point directly in your furniture. This built-in pop-up wireless charger combines a Qi charging surface with two USB-A ports to give users a practical way to charge compatible phones, earbuds and other USB-powered devices from one compact unit.

Its recessed design fits into a 60 mm tabletop opening. When the wired ports are not needed, the unit closes into the table for a cleaner, less obtrusive appearance.

Charge Up to Three Devices

The integrated charging station provides one wireless charging position and two wired USB-A outputs. Depending on the connected power adapter and devices, users can connect up to three devices at the same time:

• One Qi-compatible device on the wireless charging surface
• One USB-powered device through the first USB-A port
• One USB-powered device through the second USB-A port

Important: Available power is shared between connected devices. Charging speeds may decrease when multiple devices are connected simultaneously.

5W, 7.5W and 10W Wireless Charging

The charger supports 5W, 7.5W and 10W wireless charging modes for compatible Qi-enabled devices. Place the phone centrally on the charging surface, and the charger automatically negotiates the appropriate power level supported by the device and power source.

Maximum charging speed depends on the phone model, connected adapter, cable, device temperature and phone case.

Two Convenient USB Charging Ports

Two integrated USB-A ports provide 5V/1A output for compatible wired devices. They are useful for phones, earbuds and other low-power USB accessories that do not support wireless charging.

The pop-up configuration keeps the USB ports accessible when required and covered when they are not in use.

Designed for Furniture Integration

With a 70 mm top diameter and a 60 mm installation cutout, this charger can be integrated into many types of commercial and residential furniture, including:

• Office desks and workstations
• Conference and meeting tables
• Hotel rooms and bedside furniture
• Reception desks and waiting areas
• Libraries and shared workspaces
• Café and restaurant tables
• Kitchen counters and home-office furniture

Built-In Charging Protection

The charging circuitry includes protection against overvoltage, overcurrent and short circuits. Dynamic power adjustment helps the unit manage power according to the connected adapter and devices.

The manufacturer specifies wireless power-transfer efficiency of up to 73%. Actual efficiency varies according to device alignment, operating conditions and charging mode.

Installation

1. Prepare or confirm a circular tabletop opening measuring approximately 60 mm in diameter.
2. Check that at least 50 mm of unobstructed space is available below the mounting surface.
3. Insert the charging unit into the opening from above.
4. Secure the charger according to the supplied mounting method.
5. Connect it to a suitable power adapter.
6. Test the wireless surface and both USB ports before regular use.

Confirm the exact cutout tolerance, tabletop thickness and clearance requirements before drilling or modifying furniture.

Technical Specifications

Planning a Multi-Unit Installation?

Contact ONEPOINTECH at info@onepointech.com for quantity pricing or help confirming installation requirements. Please include the required quantity, destination country, tabletop thickness and intended application with your inquiry.